Placing Strokes On Paths; To Move A Brush Stroke Inside Or Outside The Selected Path - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Placing strokes on paths

By default, an object's brush stroke is centered on a path. You have the option of placing the
brush stroke completely inside or outside the path. This allows you to control the overall size
of stroked objects and to create effects such as strokes on the edges of beveled buttons.
Centered stroke, stroke inside, and stroke outside
You can use the Stroke pop-up menu in the Stroke Options window to reorient brush strokes.

To move a brush stroke inside or outside the selected path:

1.
Click the Stroke Color box in the Tools panel or the Property inspector to open the color
box pop-up window.
2.
Select an option from the Location of Stroke Relative to Path pop-up menu: Inside,
Centered, or Outside.
3.
Optionally, select the Fill over Stroke option.
Normally, the stroke overlaps the fill. Selecting Fill over Stroke draws the fill over the
stroke. If you select this option for an object with an opaque fill, any part of the stroke
that falls inside the path is obscured. A fill with a degree of transparency may tint or blend
with a brush stroke inside a path.
Working with strokes 181