Positioning Pop-Up Menus And Submenus; To Set The Position For A Pop-Up Menu Using The Pop-Up Menu Editor - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Positioning pop-up menus and submenus

The Position tab of the Pop-up Menu Editor lets you specify a pop-up menu's position. You
can also position a top-level pop-up menu by dragging its outline in the workspace when the
Web Layer is visible.

To set the position for a pop-up menu using the Pop-up Menu Editor:

1. With the desired pop-up menu open in the Pop-up Menu Editor, click the Position tab.
For information on opening an existing pop-up menu in the Pop-up Menu Editor, see
"Editing pop-up menus" on page
2. Do one of the following to define the menu position:
Click a Position button to position the pop-up menu relative to the slice that triggers
it.
Enter x and y coordinates. Coordinates of 0,0 align the upper left corner of the pop-up
menu with the upper left corner of the slice or hotspot that triggers it.
3.
Do one of the following:
If you have submenus, position them as described in the next procedure.
Click Back to modify properties on other tabs.
Click Done to close the Pop-up Menu Editor.
304.
Creating pop-up menus 303