Applying Multiple Rollovers To A Slice; Removing A Drag-And-Drop Rollover - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Applying multiple rollovers to a slice

You can drag more than one behavior handle from a single slice to create multiple swap
behaviors. For example, you can trigger a rollover and a disjoint rollover from the same slice.
A slice triggering a rollover behavior and a disjoint rollover behavior
You can also add multiple behaviors using the Behaviors panel. For more information,
see "Using the Behaviors panel to add interactivity to slices" on page
To apply more than one rollover to a selected slice:
1.
Drag a behavior handle from the selected slice to the edge of the same slice or onto another
slice.
Dragging the handle to the upper-left edge of the same slice creates a swap image, and
dragging it to another slice creates a disjoint rollover.
2.
Select the frame of the swap image and click OK.
3.
Create more rollovers by repeating steps 1 and 2 as many times as desired.

Removing a drag-and-drop rollover

You can easily remove a drag-and-drop rollover from a slice, hotspot, or button.
To remove a drag-and-drop rollover from a selected web object or button:
1. Click on the blue behavior line you want to remove.
2. Click OK to remove the swap image behavior.
266.
Making slices interactive 265