Creating A Disjoint Rollover - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

6.
Select the slice and place the pointer over the behavior handle. The pointer changes to a
hand.
You can select the slice while in any frame.
7.
Click the behavior handle and select Simple Rollover from the menu.
8.
Click the Preview tab and test the simple rollover, or press F12 to preview it in a browser.

Creating a disjoint rollover

A disjoint rollover swaps in an image under a web object when the pointer rolls over another
web object. In response to a pointer rolling over or clicking a trigger image, an image appears
in a different location on the web page. The image that is rolled over is considered the trigger;
the image that changes is considered the target.
As with simple rollovers that use just one slice, you first have to set up the trigger and target
slices and the frame in which the swap image resides. Then you can link the trigger to the
target slice with a behavior line.
The trigger for a disjoint rollover doesn't have to be a slice. Hotspots and buttons also
have behavior handles that can be used to create disjoint rollovers. For more information
on hotspots, see
see "Creating button symbols" on page
"Creating hotspots" on page 276. For more information about buttons,
282.
Making slices interactive 263