Advertisement
Quick Links
Overview
This guide provides step-by-step instructions on how to physically install and power up the Cisco 3365
Mobility Services Engine (MSE). Details on running the automatic installation script is also provided.
This chapter contains the following sections:
•
•
•
External Features Overview
The Cisco MSE 3365 comes with four Small form factor (SFF) drives. See
External Features Overview, page 1-1
Status LEDs and Buttons, page 1-3
General Warnings, Regulatory and Safety, page 1-8
1
C H A P T E R
Figure
Cisco MSE 3365 Installation Guide
1-1.
1-1
Advertisement
Related Manuals for Cisco MSE 3365
Summary of Contents for Cisco MSE 3365
- Page 1 C H A P T E R Overview This guide provides step-by-step instructions on how to physically install and power up the Cisco 3365 Mobility Services Engine (MSE). Details on running the automatic installation script is also provided. This chapter contains the following sections: •...
- Page 2 Chapter 1 Overview External Features Overview Figure 1-1 shows the front panel of the Cisco MSE 3365. Figure 1-1 Cisco MSE 3365 Front Panel HDD 02 HDD 01 HDD 03 HDD 05 HDD 04 HDD 06 HDD 07 HDD 08 Drive bays 1–8 support SAS/SATA...
-
Page 3: Status Leds And Buttons
Chapter 1 Overview Status LEDs and Buttons Figure 1-2 shows the rear panel of the Cisco MSE 3365. Figure 1-2 Cisco MSE 3365 Rear Panel PCIe 01 PCIe 02 PSU 01 PSU 02 mLOM PCIe riser 1/slot 1 (not used) - Page 4 Amber—Cisco MSE 3365 is in standby power mode. Power is supplied only to the Cisco IMC and some motherboard functions. • Green—Cisco MSE 3365 is in main power mode. Power is supplied to all the MSE 3365 components. Unit identification •...
- Page 5 Green—Cisco MSE 3365 is running in normal operating condition. • Green, blinking—Cisco MSE 3365 is performing system initialization and memory • check. Amber, steady—Cisco MSE 3365 is in a degraded operational state. For example: • Power supply redundancy is lost. – CPUs are mismatched.
-
Page 6: Rear Panel Leds And Buttons
PSU 01 PSU 02 mLOM Optional mLOM card LEDs. 1-Gb Ethernet link status LED Note This LED is not applicable for Cisco MSE 3365. 1-Gb Ethernet dedicated management link Rear unit identification button/LED status LED 1-Gb Ethernet dedicated management link... - Page 7 Green, blinking—12 V main power off; 12 V standby power on. • Green, solid—12 V main power on; 12 V standby power on. • Amber, blinking—Warning detected but 12 V main power on. • Amber, solid—Critical error detected; 12 V main power off. Cisco MSE 3365 Installation Guide...
- Page 8 Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Ultimate disposal of this product should be handled according to all national laws and regulations. Warning Statement 1040 Cisco MSE 3365 Installation Guide...
-
Page 9: Regulatory And Safety
Overview General Warnings, Regulatory and Safety Regulatory and Safety Refer to Appendix A for translated safety information for the Cisco 3365 Mobility Services Engine. Note Refer to Appendix B for regulatory information for the Cisco 3365 Mobility Services Engine. Note... - Page 10 Chapter 1 Overview General Warnings, Regulatory and Safety Cisco MSE 3365 Installation Guide 1-10...