Time Windows Programming - ADEMCO VISTAKEY User Manual

Performing Scheduling Operations (cont'd)

Time Windows Programming

Enter Scheduling Mode by entering User Code + [#] + 80 if you are
not already in the Scheduling mode. The keypad displays the "Time
Windows?" programming prompt.
Time Windows ?
1 Yes
TIME WINDOW # ?
01-20, 00 = QUIT
01 TIME WINDOW
00:00AM
– 46 –
Press 1 at this main menu prompt to program
0 = No 0
time windows.
Enter the 2-digit time window number (01-20)
01
to be programmed.
Press [ ] to accept the entry.
Enter 00 + [ ] at the "TIME WINDOW #?"
prompt to quit time window programming and
display the "Quit ?" prompt.
If you entered a time window number, the
00:00AM
cursor is now positioned on the starting
hour of the time window.
Enter the desired starting hour and press [ ].
The cursor moves to the minutes position.
Enter the desired minutes and press [ ]. Toggle
the AM/PM indication by pressing any key 0-9
while the cursor is under the A/P position and
then press [*]. Repeat this to enter the stop time
of the window.
Note that if your system uses a 24-hour clock
(i.e., 5:00 PM displays as 17:00) the time
entered here must also be based on a 24-hour
clock so add 12 to any entries that are PM.