ADEMCO VISTAKEY User Manual page 29

Performing Access Control Card Functions (cont'd)
VISTA Card ID Number
001 Trace?
NOT ENABLED 0
ACS GRP? 1 2 3 4 5 6 7 8
HIT 0-8 x x x x x x x x
The Trace feature allows the cardholder to be
monitored by logging his entry/exit grants and
denials in the log and (if programmed) dialing
out and sending a report to central station. Note
that a card may also inherit a trace enable from
its access group assignment. A card is traced if
any access group that it is assigned to has trace
enabled.
NOTE: If a card has expired (from number of
uses or date) and trace is enabled, any attempt
to use the card will be logged and dial out (if
enabled) as user U999. When a card expires, it
remains in the database so that it may be
reinstated if desired.
Press 1 to trace the cardholder, or 0 for no trace.
Press [*] to accept the entry.
Each cardholder must belong to at least one
access group. The access group provides the
cardholder with certain privileges afforded to all
cardholders that belong to that access group. If a
cardholder belongs to more than one access
group, he is afforded all the privileges of all the
access groups he belongs to. The access groups
also determine which
cardholder has access to, and at what times,
according to the schedule assigned for the access
group.
Press 0 to toggle all groups on or off; or press
keys 1-8 to toggle the letter "x" under the group
numbers on or off.
Press [*] to accept the entry.
access point(s) the
– 29 –