Table of Contents
Advertisement
User Commands (cont'd)
Quit?
1=YES 0=NO
Schedule Control (#80)
The #80 command is used to define or change system time windows
and/or time-driven events. For instructions on using this command,
refer to Performing Scheduling Operations.
– 12 –
Press the [*] key to continue. The action
specified (or cancellation) takes effect and the
following message is displayed on the keypad:
Press 1 if you are finished entering actions or
0
press 0 if you want to enter additional actions.
Press the [*] key to accept your entry. If you
entered 1, the program exits. If you entered 0,
the system returns to the "Action ?" prompt.
Hide quick links:
Advertisement
Table of Contents
