ADEMCO VISTAKEY User Manual page 26

Performing Access Control Card Functions (cont'd)
VISTA Card ID Number
001 Block Entry?
1=YES 0=NO
Quit?
1=YES 0=NO
– 26 –
information where the display is dependent
upon the action selected. For example, if the
action you selected is 01 (relay on), the system
presents a message asking for a relay number.
Respond to the message presented, and then
press [*] to accept the entry.
Block enrollment (entry) allows you to enroll
numerous cards with the same previously
0
entered data. If the card data to be entered is
significantly different from one card to another,
then answer "NO" and enter each card's data
individually by swiping the card and entering
data alternately. Otherwise, enter "yes" to
duplicate card data for every card swiped. The
sequence for block enrollment is: swipe card,
press [*], enter data, swipe card, press [*], swipe
card, press [*],... swipe card, press [*], quit. The
sequence for individual data entry is: swipe
card, press [*], enter data, swipe card, press [*],
enter data ... swipe card, press [*], enter data,
quit.
Press 1 to swipe additional cards with identical
data definitions or 0 if additional cards with
identical data definitions are not being entered.
Press 1 or 0.
0
If you press 1, the system advances to the "Quit
Card Mode?" prompt.
If you press 0, the system returns to the
"SWIPE CARD" prompt.