Table of Contents
Advertisement
Performing Scheduling Operations (cont'd)
Scheduling Menu Mode
The #80 Scheduling Menu Mode is used to program time windows and
timed-event options. To enter this mode, the system must first be in
the normal operating mode (all partitions disarmed).
The following can be programmed while in this mode:
Time windows
Open/close schedules*
Holiday schedules*
Timed events
Access schedules*
* IMPORTANT: The schedule options denoted by the * should not
be used. Your system installer programmed these items, if
applicable.
To program schedules, enter the Scheduling Program Mode:
User Code + # + 80.
NOTE: This mode can only be entered when all partitions are
disarmed.
There are 5 sections of scheduling menus, as shown below. Pressing 1
at a displayed main menu prompt selects that menu option. Prompts
for programming that option then appear. Press 0 to skip a section
and display the next menu option.
Time Window ?
1 Yes
– 44 –
Upon entering Schedule Menu Mode, this
0 = No
0
prompt appears. Press 1 to program time
windows.
ming
instructions.
Press 0 to move to the "O/C Schedules?"
prompt.
Refer to Time Windows Program-
later
in
this
section
for
detailed
Hide quick links:
Advertisement
Table of Contents
