Performing Scheduling Operations (cont'd)
01 ACTION ?
none
– 48 –
Enter 00 at the "TIMED EVENT #?" prompt to
quit the timed event menus and display the
"Quit ?" prompt.
Enter the action code for this timed-event
00
number from your Time-Driven Events
Worksheet.
NOTE: Action codes 60 (AP Exit Only), 66 (AP
Group Exit Only), or 72 (AP Partition Exit Only)
disable the entry reader at the access point. The
reader will remain disabled until a command is
received (via a keypad command or event) to
protect the access point.
Press [ ] to accept the entry. The prompt for the
action specifier will display.
Actions 01-05
If you selected actions 01-
05, the prompt at the right
is displayed. Enter the
relay number.
Press [
to accept entry.
]
The "Time Window ?"
prompt appears.
Actions 06-10
If you selected actions 06-
10, the prompt at the right
is displayed. Enter the
relay group number.
Press [
to accept entry.
]
Action Specifier:
01 RELAY # ?
00
01 RELAY GRP # ?
00