ADEMCO VISTAKEY User Manual page 51

Performing Scheduling Operations (cont'd)
01 Time Window ?
00:00 00:00 01
01 Active time ?
0
or press keys 1-8 to toggle
the letter "x" under the
access group numbers to
turn them on or off.
Press [ to accept entry.
]
The "Time Window ?"
prompt appears.
Enter the time window number (01-20) for
which this timed event is to occur.
number is keyed in, the actual time that has
been stored for the time window number is
displayed.
Press [ to accept entry.
]
Enter the activation time from 1-4 (listed
below). As the number is keyed in, the
activation time is displayed. The choices are:
1: Trigger at the start of the window.
2: Trigger at the end of the window.
3: Take effect only for the duration of the
window.
4: Trigger at both the start and the end of
the window.
Press [ to accept entry.
]
As the
– 51 –