ADEMCO VISTAKEY User Manual page 45

Performing Scheduling Operations (cont'd)
O/C Schedules ?
1 Yes 0 = No 0
Holidays ?
1 Yes 0 = No 0
Timed Events ?
1 Yes 0 = No 0
Access Sched. ?
1 Yes 0 = No 0
Quit ?
1 Yes 0 = No 0
Press 1 to program opening and closing
schedules.
IMPORTANT: This schedule option should not
be used. Your system installer programmed this
item, if applicable.
Press 0 to move to the "Holidays?" prompt.
Press 1 to program holiday schedules.
IMPORTANT: This schedule option should not
be used. Your system installer programmed this
item, if applicable.
Press 0 to move to the "Timed Events?" prompt.
Press 1 to program timed events for relay
outputs, additional schedules, and other system
functions. Refer
Programming later in this section for detailed
instructions.
Press 0 to move to the "Access Sched?" prompt.
Press 1 to program access schedules.
IMPORTANT: This schedule option should not
be used. Your system installer programmed this
item, if applicable.
Press 0 to move to the "Quit?" prompt.
Press 1 to quit #80 Scheduling Menu Mode and
return to normal operating mode.
Press 0 to make any changes or review the
scheduling programming options. If you press
0, the "Time Window?" prompt is displayed.
to Time-Driven Event
– 45 –