ADEMCO VISTAKEY User Manual page 52

Performing Scheduling Operations (cont'd)
Days ? MTWT F S S H
Hit 0-8
Quit ?
1 = YES 0 = NO
– 52 –
The system then asks for which days the event
x x
is to be activated.
Press 0 to toggle all days on or off; or else press
keys 1-8 to toggle the letter "x" under the days
to turn them on or off (Monday = 1, Holiday = H
= 8).
NOTE: When holiday is selected, it will over-
ride the day of the week selection (e.g., Holiday
is selected and the holiday falls on Saturday but
Saturday is not selected. The Holiday selection
makes the Event/Action active).
When all entries have been made, the "TIMED
EVENT #?" prompt is displayed again.
Repeat the procedure for each timed event
required for the installation.
Press 0 at the "Quit ?" prompt to return to the
0
main menu choices and continue programming.
Press 1 to quit Scheduling Menu Mode.