ADEMCO VISTAKEY User Manual page 28

Performing Access Control Card Functions (cont'd)
VISTA Card ID Number
001 Exec Priv?
NOT ENABLED
– 28 –
Enabling executive privilege for this cardholder
allows the cardholder to access any access point
0
and disarm its partition (if armed) at any time.
This occurs
cardholder's access
scheduling or whether his access group is
enabled to enter or exit through any of the
access points.
The only condition that prevents a cardholder
with executive privilege from gaining access
through an access point is a card that has
expired via usage or date. Disabling executive
privilege allows cardholders entry through
access points only if the following conditions
exist:
The access point has been programmed to
accept the cardholder's access group.
The cardholder's access group is enabled at
the time of the card swipe (via scheduling,
event/action or action selector), PIN entry
(code+#73), or RF button remote depression.
The cardholder's card has not expired.
Press 1 to provide the cardholder with executive
privileges, or 0 for no executive privileges.
Press [*] to accept the entry.
NOTE: If the card belongs to an access group
that has executive privilege enabled, this
feature can be inherited from the access group;
however, only executive privilege assigned to a
card will be accepted when the VistaKey is
operating in RCM.
regardless of whether
group is enabled
the
via