ADEMCO VISTAKEY User Manual page 33

Performing Access Control Card Functions (cont'd)
VISTA Card ID Number
001 ACS Event?
Never Invoke 00
VISTA Card ID Number
001 Access Point?
(01-15) 00
VISTA Card ID Number
001 ACTION?
None 00
Enter two digits from the list below for the
access point-related event desired. Acceptable
entries have the following meanings:
00 = never invoke
02= access request
03 = egress request
04 = any request
05 = access grant
Press [*] to accept the entry.
NOTES:
If you selected 00 "never invoke," the system
advances to the "Block Entry" prompt.
For the ACS Event to occur, the card must be
swiped at the access point defined in the
following prompt.
Enter 1 through 15 for the access point number
corresponding to the event defined above.
Press [*] to accept the entry.
Enter the two-digit Action Number defining the
action desired. For acceptable entries and their
meanings see Table 1: Action Codes.
NOTES:
For the Action to occur, the ACS Event
(defined above) must have been invoked by a
card swipe at the access point defined in the
above prompt.
Actions that arm or disarm a partition will
only be performed if the VISTA User number
06 = egress grant
07 = any grant
08 = access denied
09 = egress denied
10 = any denial
– 33 –