ADEMCO VISTAKEY User Manual page 35

Performing Access Control Card Functions (cont'd)
SWIPE CARD
xxx-xx-xxxxxxx
Are You Sure?
1=YES 0=NO 0
Quit?
1=YES 0=NO 0
Swipe card or enter card number to be deleted.
The card number and VISTA card ID number to
be deleted is displayed on the keypad. Note that
if the card swiped is not found in the system
database, the card number displayed and VISTA
card ID number are shown as zeros.
Press [*] to accept the entry.
If the card is found in the system database, the
system advances to the "Are You Sure?" prompt.
If the card is not found in the system, the
following "Card not Found" prompt is displayed.
Card not Found
to continue
Press 1 or 0.
If you press 1, the system marks the card as
deleted in the card database.
If you press 0, the system advances to the
"Quit?" prompt.
Press [*] to accept the entry.
Press 1 or 0.
If you press 1, the system advances to the "Quit
Card Mode?" prompt.
If you press 0, the system returns to the "Swipe
Card" prompt.
Press [*] to accept the entry.
Press [*] to continue. The
system advances to the
"Quit?" prompt.
– 35 –