ADEMCO VISTAKEY User Manual page 20

Performing Access Control Card Functions (cont'd)
– 20 –
This occurs regardless
cardholder's access
scheduling or whether his access group is
enabled to enter or exit through any of the
access points.
The only condition that prevents a cardholder
with executive privilege from gaining access
through an access point is a card that has
expired via usage or date. Disabling executive
privilege allows cardholders entry through
access points only if the following conditions
exist:
The access point has been programmed to
accept the cardholder's access group.
The cardholder's access group is enabled at
the time of the card swipe (via scheduling,
event/action, or action selector), PIN entry
(code+#73), or RF button remote depression.
The cardholder's card has not expired.
Press 1 to provide the cardholder with executive
privileges, or 0 for no executive privileges.
Press [*] to accept the entry.
NOTE: If the card belongs to an access group
that has executive privilege enabled, this
feature can be inherited from the access group;
however, only executive privilege assigned to a
card will be accepted when the VistaKey is
operating in RCM.
of whether
group is enabled
the
via