Time Windows And Timed Events; Description; How This Feature Is Used In Our Example; Where To Program - ADEMCO VistaKey-SK Installation & Setup Manual

Single-door access control starter kit
Hide thumbs Also See for VistaKey-SK:
Table of Contents

Advertisement

ACCESS
CARDHOLDERS
GROUP
GROUP
1
Executive Officers a. Can access all access points.
2
Office Managers
3
Office Workers
4
Factory Managers a. Can access points 1 and 3 during
5
Factory Workers

Time Windows and Timed Events

Description

Using Time Windows in access control is the most efficient way to manage the access control
resources and system events. Time windows allow direct and finite control of cardholder
access to certain access points by time of day.

How this feature is used in our example

By using time windows and timed events to enable and disable access groups, we are able to
control when cardholders are permitted through an access point. As shown in our worksheet
below, the Office Managers are allowed to use access points 1 and 2 between the hours of
6:00 AM and 7:00 PM. In fact, all cardholder groups in this example operate under a time
window constraint (except for Executive Officers).

Where to program

Program Time Windows and Timed Events in the #80 Scheduling Mode. The action selected
is 77 Access Group Enable. The action will be enabled during the time window, then disabled
outside the specified time window.
PRIVILEGES
b. Can disarm/arm all partitions.
c. Have access 24 hours a day, 7 days
a week.
d. Valid card swipe automatically
disarms respective partition.
a. Can access points 1 and 2 during
time schedule while partitions are
armed or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 2.
c. Cannot access point 3 or disarm/arm
partition 3.
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 2 only while
disarmed and during time schedule.
Cannot arm/disarm partition 2.
d. Cannot access point 3 or arm/disarm
partition 3.
time schedule while partitions armed
or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 3.
c. Cannot access point 2 or disarm/arm
partition 2.
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 3 only while
disarmed and during time schedule.
Cannot arm/disarm partition 3.
d. Cannot access point 2 or arm/disarm
partition 2.
Section 2 – Access Control Integration
ARMED RESTRICTION (Ptns)
1
2
X
3
4
X
2–7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents