Overview; Introduction - ADEMCO VISTAKEY User Manual

Overview

Introduction

Congratulations on your ownership of a UL-approved ADEMCO
VistaKey-SK Access Control Unit. The VistaKey-SK, interfaced to
your security system, delivers a combination of access control
capabilities with fire detection, intrusion detection, and hold-up
systems. When connected to the control panel, the VistaKey-SK can
operate the control panel and can provide access control to the
protected premises.
The VistaKey-SK:
Helps to reduce unwanted alarms caused by improper keypad
operation by simplifying operation through the use of a card-swipe
reader or wireless fob.
Aids in reducing operational costs by eliminating the need to re-key
caused by employee turnover.
Helps to improve security by controlling access of individuals to
specific areas in the protected premises.
Assists in streamlining security operations by monitoring and
recording user activity at a single location.
Helps to minimize security investments by integrating access
control, intrusion detection, and early-warning fire detection.
When the VistaKey-SK is interfaced to your security system,
additional commands and operational capabilities are added to your
system. This guide describes these additional commands and
operational capabilities, and should be used with your existing
security system User Guide.
– 4 –