Table of Contents
Advertisement
3.
The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS lands. See
the Voltage Regulator Design Guide for socket loadline guidelines and VR implementation details.
4.
Adherence to this loadline specification is required to ensure reliable processor operation.
Figure 1.
Processor V
VID - 0.000
VID - 0.013
VID - 0.025
VID - 0.038
VID - 0.050
VID - 0.063
VID - 0.075
VID - 0.088
VID - 0.100
VID - 0.113
VID - 0.125
VID - 0.138
VID - 0.150
VID - 0.163
VID - 0.175
VID - 0.188
NOTES:
1.
The loadline specification includes both static and transient limits except for overshoot allowed as shown in
Section
2.
This loadline specification shows the deviation from the VID set point.
3.
The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS lands. See
the Voltage Regulator Design Guide for socket loadline guidelines and VR implementation details.
2.6.3
V
Overshoot
CC
The processor can tolerate short transient overshoot events where V
voltage when transitioning from a high to low current load condition. This overshoot
cannot exceed VID + V
The time duration of the overshoot event must not exceed T
maximum allowable time duration above VID). These specifications apply to the
processor die voltage as measured across the VCC_SENSE and VSS_SENSE lands.
Table 6.
V
Overshoot Specifications
CC
Symbol
V
OS_MAX
T
OS_MAX
NOTES:
1.
Adherence to these specifications is required to ensure reliable processor operation.
20
Static and Transient Tolerance
CC
0
5
10
15
20
Vcc Typical
2.6.3.
(V
OS_MAX
OS_MAX
Parameter
Magnitude of V
overshoot above
CC
VID
Time duration of V
overshoot above
CC
VID
Icc [A]
25
30
35
40
45
Vcc Maximum
Vcc Minimum
is the maximum allowable overshoot voltage).
Min
Max
—
—
Electrical Specifications
50
55
60
65
70
exceeds the VID
CC
(T
is the
OS_MAX
OS_MAX
Unit
Figure
50
mV
2
25
µs
2
Datasheet
75
Notes
1
1
Advertisement
Table of Contents
