Stak - Select Paper Stacker - Kyocera DP-1800 Command Reference Manual

STAK —
select paper STAcKer
Format
Parameter
stacker:
Function
File
STAK stacker;
1 = printing system's face-down output tray
2 = face-up output tray of the printing system or the option stacker
3 = face-down output tray of the option stacker
51 = face-up output tray of the option mailbox
52 = face-down output tray of the option mailbox
61 = face-down output tray of the option job separator (or the DF-610 subtray)
62 = face-up output tray of the DF-610 subtray
The STAK command instructs the printing system to deliver pages to the corresponding
output stack of the printing system or the option stacker. The selected tray remains in
effect until changed by another STAK command. The default value is 1: the printing
system's face-down tray.
If an optional device such as a stacker, a document finisher, or a sorter is installed, the
stacker value 2 instructs the printing system to deliver printed pages to its face-up tray;
the value 3 delivers the pages to its face-down tray. The stacker values of 51, 52, and 61
are valid for certain copiers installed with the applicable option device.
The STAK command should be placed at the top of a file or program.
!R! STAK 2; EXIT;
PAGE 1
On printers with only one paper tray this file will be
delivered face-down as usual, page 1 first.
!R! PAGE; EXIT;
PAGE 2
PAGE 2 next, and so on, stacking in the correct order.
!R! PAGE; EXIT;
PAGE 3
But on printers with two paper trays this file will be
delivered to the face-up tray with the pages in reverse
order, page 3 on top.
!R! PAGE; EXIT;
STAK
335