Blk - Draw Filled-In Block; Blk; Draw Filled-In Block - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
BLK —

draw filled-in BLocK

Format
Parameters
width:
depth:
option:
Function
40
BLK width, depth[, option];
width of the block
depth of the block
B = Leave the cursor unmoved (Default)
H = Move the cursor to the horizontally adjacent corner
V = Move the cursor to the vertically adjacent corner
E = Move the cursor to the diagonally opposite corner
L = Move the cursor one line down
N = Move the cursor to the beginning of the next line
B-option (No motion)
L-option
N-option
Left margin
V-option
The BLK command draws a block of a specified size with one corner at the current
cursor position. The block is filled in with the pattern designated by the previous PAT,
FPAT, or GPAT command. The cursor is moved as specified by the option. If the option
is omitted, the cursor is not moved (same as option B).
H-option
E-option