Xbcp 19 - Position Symbols At The Specified Locations - Kyocera DP-1800 Command Reference Manual

XBCP 19 —
Format
Parameter
x1, y1, x2, y2, x3, y3, ...
Function
File 1
position symbols at the specified
locations
XBCP 19[, x1, y1, x2, y2, x3, y3, ...];
x and y coordinates that represent the positions of the divided barcodes measured from
the current cursor position
The multiple PDF417 symbol from one large data can be positioned at the specified
locations using the XBCP 19 command. X
symbol to the first symbol, X
coordinate (like the MRP command described on the printing system's manual). The
remaining pairs of positioning parameters are ignored if there are no more PDF symbol
to print.
The relative location parameters, X
page. The positioning command such as MZP and ENDB should be used to specify the
macro PDF location if there are data beyond first page. PDF symbol will be positioned a
half inch below the previous PDF symbol if there are no positioning parameter exist or
insufficient number of positioning parameters exist.
The combination with multiple number of ENDB command allows to print multiple
number of macro PDF on multiple pages. Note RES, XBCP0, and XBAR command will
delete the remaining macro PDF data if all data has not been printed. Therefore, the page
eject should not be done by RES command.
In Macro PDF mode, data such as large as 3000 bytes print 3 90-column-by-30-row PDF
symbols at specified locations specified by XBCP 19. In the file below, the second line
XBCP 17 activates Macro PDF mode and specifies QualitySt for file-id. The third line
MZP command positions the first barcode at 1 inch each from the left and right paper
edge limits. The fourth line XBCP 19 moves the cursor 1 inch from the left and 2 inches
below the point where the first barcode started and prints the second barcode; then
moves the cursor 1 inch from the left and 2 inches below the point where the second
barcode started and prints the third barcode.:
!R! RES;
XBCP 17,"QualitySt";
MZP 1, 1;
XBCP 19,1,2,1,2;
XBAR; large data such as 3000 bytes;ENDB;
EXIT;
, Y is the relative location of second PDF
1 1
, Y for third, and so on as measured from the current
2 2
and Y can not define the location beyond first
n n
XBCP 19
387