Rwrf W - [Read/Write Resource File] Write Data To External Device (Printable Data) - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
RWRF W —
Format
Parameters
medium:
file-name:
Function
262
[Read/Write Resource File] Write data
to external device (printable data)
RWRF W, medium, "PRN", "file name";
0 = hard disk
A = memory card
ASCII text string up to 15 bytes
Automatically set by the system if omitted.
The RWRF W command writes data to an external device such as the hard disk.
The number of writable files, which is not limited, depends on the capacity of the
external media. If the device runs out of free space during saving, the remaining data will
be discarded.
Duplicating a file name causes the system to rename the specified one and save data
(without overwriting data).
As described in the example below, add the string "WRED" to the end of the file name.
Example:
Write and register printable data "TEST" to the hard disk.
!R! RWRF W, 0, "PRN", "TEST"; !R! TEXT "TEST"; PAGE; EXIT;
WRED; EXIT;