Map - Move To Absolute Position - Kyocera DP-1800 Command Reference Manual

MAP —
Move to Absolute Position
Format
Parameters
x-coordinate:
y-coordinate:
Function
File
MAP x-coordinate, y-coordinate;
distance from the left margin
distance from the top margin
The MAP command moves the cursor to a position specified relative to the top and left
margins, measured in the units designated by the UNIT command. The coordinates may
be positive or negative. Negative coordinates move the cursor outside the margin.
The MAP command is ignored in path mode graphics.
!R! RES; UNIT C; STM 2; SLM 2;
SFNT 'Helvetica-Nr', 9;
MAP 0, 0; BOX 40, 40; SPD .2;
MAP 0, 1.4; TEXT '< = = = Margins';
MAP 0, 0; CIR .1; TEXT, L; TEXT ' MAP 0, 0;';
MAP 4, 0; CIR .1; TEXT, L; TEXT ' MAP 4, 0;';
MAP 0, 2; CIR .1; TEXT, L; TEXT ' MAP 0, 2;';
MAP 4, 2; CIR .1; TEXT, L; TEXT ' MAP 4, 2;';
MAP -1, -1; CIR .1; TEXT, L; TEXT ' MAP -1, -1;';
PAGE;
EXIT;
MAP
157