Spal - Select Palette - Kyocera DP-1800 Command Reference Manual

SPAL —
Select PALette
COLOR
Format
Parameter
id:
Function
File and Printout
SPAL id;
palette ID number: 0 to 32767 (default is 0)
The SPAL command selects the palette to activate from among the palettes that are
currently available. If no palette is associated with the specified number, this command is
ignored.
The palette activated by SPAL is deleted when a new palette is created by the CID
command. The active palette number does not change. All palettes are deleted by the
reset command, leaving only the default palette.
See ACLI on page 12.
SPAL
317