Jobt - Job Terminate - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
JOBT —
Format
Parameter
Function
File
144
JOB Terminate
JOBT;
None
The JOBT command terminates defining a job which is started by JOBS. The JOBT
command is used in combination with JOBS to constitute a job definition. The printing
system prints the job in the number of copies as specified by the repeat count
commanded by JOBS or JOBP in the cyclic manner.
At execution, the JOBT command starts printing the job including stapling, job
separation, job offset (if the relevant option device is installed).
The file below sorts and prints the defined job in 40 copies. The pages between JOBS
and JOBT are output to virtual mailbox number 3. Pages after JOBT are output to the
current physical stack.
!R! JOBS 0,40,2,0;
TEXT "Circulation Slip";
PAGE;
TEXT "Response Slip";
PAGE;
JOBT;
EXIT;