Rwer D - [Read/Write External Resource] Delete Data On External Media - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
RWER D —
Format
Parameters
medium:
data-type:
partition-name:
Function
242
[Read/Write External Resource] Delete
data on external media
RWER D, medium, data-type, 'partition-name';
0 = hard disk or RAM disk
A = memory card
type of data to be deleted
1 = Font data
2 = Printable data
16 = Macro data
112 = File data
128 = API data (downloadable program)
Name of partition from which data is deleted
The RWER D command deletes data on any external media whether it is a memory card
or the hard disk. This command has no effect if the media has been write protected using
KPDL or PJL.
The partition name may be a maximum of 15 printable ASCII characters (20H through
7EH); upper and lower case letters are regarded distinct. A partition name may not have
leading spaces, and in the command, the partition name must be enclosed in single or
double quotation marks.
A partition list is not automatically printed when deleting data on external media, even
though the automatic printing of partition information was enabled (by the RWER I
command). ( See page 244.)
A command error results and the command has no effect if parameters other than the
above are used.
This command causes a page break.