Jobo - Job Output - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
JOBO —
Format
Parameters
mode:
job-id (mode 0):
mailbox-id (mode 8):
password (mode 8 only):
Function
136
JOB Output
JOBO mode, 'job-id' or 'mailbox-id'[, password];
0 = normal
8 = virtual mailbox
job ID or page ID
mailbox ID from 1 to 255, or alias
password for the mailbox
The JOBO command retrieves a temporary or permanent job or the jobs saved in the
virtual mailbox and prints with the finishing arrangements previously made.
Mode 0 is used to retrieve and print a temporary or permanent job. The job to be
retrieved may be specified by the job ID which is given internally by the printing system.
It is also possible to specify the page ID if only a particular page is required to be printed.
The page is automatically assigned and printed on a page when one of the ID barcode
position parameters of 128 though 135 is specified for JOBS. A list of job names
currently stored in the hard disk can be obtained by printing a job list (See JOBL on page
134).
Settings such as the number of pages to print, whether to print barcode ID on the printed
pages, etc., for the job to be retrieved by JOBO can be made by issuing JOBP followed
by a JOBO (See JOBP on page 138).
If the job name does not exist or the job is corrupted in hard disk, an error is messaged on
the operator panel display as follows:
Hard Disk Error Meaning
99 The job does not exist.
98 The job is corrupted.
Mode 8 retrieves jobs stacked on a virtual mailbox for printing. In mode 8, the ID
number (or the alias, if the mailbox has one given) for the mailbox should be specified in
place of job-name. The mailbox ID number should be 1 to 255. All jobs in the mailbox
specified by its mailbox ID are printed at once. After printing is finished, all jobs in the
mailbox are automatically deleted.