Text - Print Text - Kyocera DP-1800 Command Reference Manual

TEXT —
print TEXT
Format
Parameters
string:
option:
U-option:
Function
TEXT ['string'][,option][,U-option];
any character string
B = Leave cursor at beginning of string
E = Move cursor to end of string
L = Move cursor down one line
N = Move cursor to beginning of next line
Underline text
The TEXT command prints the given string at the cursor location, then moves the cursor
as designated by the option. The string to be printed must be enclosed in either single or
double quotation marks. (If the string includes one kind of quotation mark, use the other
kind to enclose it.) If the string is omitted, nothing is printed. TEXT, N; can be used to
print a blank line, for example. If the option is omitted, the cursor is not moved (same as
option B). If the U-option is specified, the string is underlined. The underline thickness
and location can be set by the SULP command.
The TEXT command can be used to position a line of text at an exact location.
The length of the string is unlimited, except that the command as a whole may not be
longer than 255 characters. Carriage-return and linefeed codes in the string are ignored.
TEXT
349