Cir - Draw Circle; Cir Draw Circle - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
CIR —
draw CIRcle
Format
Parameter
radius:
Function
File
52
CIR radius;
radius of the circle
In standard graphics mode, the CIR command draws a circle centered at the current
cursor position. The line thickness used is designated by the SPD command.
A circle can also be drawn by using the path mode graphics. Refer to the PARC
command.
!R! RES; UNIT C; SLS .5;
SPD .01; MAP 10, 1;
CIR .1; MRP 0, .1;
CIR .2; MRP 0, .2;
CIR .4; MRP 0, .4;
CIR .8; MRP 0, .8;
SPD .02;
CIR 1.6; MRP 0, 1.6;
CIR 3.2; MRP 0, 3.2;
SPD .2;
CIR .1; MRP .2, .4;
SFNT "Helvetica-Nr"; TEXT 'Cursor now here';
PAGE;
EXIT;