Kyocera DP-1800 Command Reference Manual page 171

The following table shows the source of the PCL macros, the location in the printer, and
the property value for the resource — important if resource protection mode is used. See
also Resource Protection in the Technical Reference manual.
Macro
Downloaded
Memory card
Internal
The internal printer firmware manages the PCL macros, recognizing the source, location
and property value of the macros.
If the printer encounters PCL macros with the same macro ID, it will prioritize them in
the following order: macros downloaded to RAM, macros residing on a memory card,
and macros stored in the EPROM.
Memory card and EPROM based PCL macros cannot be deleted. Downloaded PCL
macros, available for all FS-series printers, may be removed using the PCL reset or
delete commands: <ESC>&f6X or <ESC>&f8X. Downloaded macros may also be sent
to specific host buffers of the printer interfaces. The memory card and ROM macros will
be available on all interfaces.
File
!R! RES; FSET 1p12v0s3b24580T;
MCRO SIGN %, string, length + 0.3;
SPD .03;
BOX %2, .3; MRP .15, .2;
TEXT %1; MRP -.15, .35;
ENDM;
CALL SIGN, 'CHECK ALL SWITCHES AND INDICATORS ...', 3.9;
CALL SIGN, 'BE SAFE; NOT SORRY', 2.1;
PAGE;
EXIT;
Printout
Location Property
RAM Temporary/Permanent
Memory card Permanent
ROM Permanent
MCRO
161