Spw - Set Page Width - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
SPW —
Set Page Width
Format
Parameter
width:
Function
File
326
SPW width;
width of page, from left margin to right margin
The SPW command sets the right margin, as measured from the left margin position in
the unit value designated by the UNIT command.
If an attempt is made to print beyond the right margin, the characters are printed on the
next line in the IBM and Epson emulation modes and discarded in the other emulations.
The SRM (Set Right Margin) command also sets the right margin, but it measures from
the left edge limit of the paper.
!R! RES; UNIT C; SLM 1;
CMNT Emulation mode is 1 (IBM);
SFNT "Univers-MdCd", 18; SLPI 4;
SPW 10;
EXIT;
Line with 1-cm left margin and 10-cm width
!R! SPW 8; EXIT;
Line with 1-cm left margin and 8-cm width
!R! SPW 6; EXIT;
Line with 1-cm left margin and 6-cm width
!R! PAGE; EXIT;