Mid - Multi-Tray Id - Kyocera DP-1800 Command Reference Manual

PRESCRIBE Command Reference
MID —
Multi-tray ID
Format
Parameter
tray-group:
Function
Note
File
Related Commands
164
MID tray-group;
number from 1 (top) to the maximum
The MID command selects a group of trays in the sorter, which is assigned by the ASTK
command and allows the subsequent SSTK (select Sorter STacKer) or CSTK (select
Collator STacKer) command to deliver the output pages into the trays of that group for
sorting or collating.
The MID command should be placed at the beginning of a file or program, or at the top
of a new page. The selection of a tray group made by the MID command is effective until
it is changed by another MID command (It is not reset by the RES command).
If the printer receives an ASTK command or one of the FRPO commands, the MID
command is canceled (the output pages will be sorted in the normal sorter mode) and you
must reselect the tray group by specifying the MID command.
The MID command is ignored while the multiple environment mode is interface-specific
(FRPO S0, 2;) or off (FRPO S0, 0;). Refer to the sorter's User's Manual.
This command is irrelevant to certain combination of photocopier models and option fin-
isher models.
To enable the multiple user mode (FRPO S0, 1;), to create three groups, to select the
second group, and to deliver outputs in the fourth tray in the (second) group, send the
following command sequence:
!R! FRPO S0, 1; ASTK 2, 5; MID 2; SSTK 2; EXIT;
This page must be delivered to the 4th tray in the sorter.
!R! RES; EXIT;
ASTK, CSTK, MSTK, SSTK