Pdzp - In Path, Draw To Zero-Relative Position - Kyocera DP-1800 Command Reference Manual

PDZP —
Format
Parameters
x-coordinate, y-coordinate:
Function
File
in Path, Draw to Zero-relative Position
PDZP x-coordinate, y-coordinate;
coordinates as measured from the left and top edge limits of the current page
The PDZP command adds a line to the current path from the current cursor position to a
position specified relative to the top and left edge limits of the current page, measured in
the units designated by the UNIT command. The cursor moves to the specified
coordinates.
The coordinates may be positive or negative. Negative coordinates may draw the line
extending outside the current page. The thickness of the line is designated by the SPD
command.
!R! RES; UNIT C;
NEWP;
PMZP 0, 0; PDZP 0, 5;
PMZP 1, 0; PDZP 0, 4;
PMZP 2, 0; PDZP 0, 3;
PMZP 3, 0; PDZP 0, 2;
PMZP 4, 0; PDZP 0, 1;
PMZP 5, 0; PDZP 0, 0;
STRK;
PAGE;
EXIT;
PDZP
195