Uom - Unit Of Measurement Per Dots - Kyocera DP-1800 Command Reference Manual

UOM —
Unit Of Measurement per dots
Format
Parameter
number:
Function
File
UOM number;
96, 100, 120, 144, 150, 160, 180, 200, 225, 240, 288, 300, 360, 400, 450, 480, 600, 720,
800, 900, 1200, 1440, 1800, 2400, 3600, 7200
The UOM command applies only to the printing system models that support the 600 dpi
resolution. It defines the unit of measurement in dots per inch for cursor movements. The
command requires that the UNIT value be set to D.
The default unit of measurement is 300 (dpi). For example, the cursor movement of 50
dots equals 1/6 inches.
The command accepts only the above numbers for the unit of measurement. Any other
numbers will be ignored when used with this command.
!R! FRPO N8, 1; RES;
UNIT C;
SFNT "Helvetica-Nr", 9;
MZP 5, 5;
TEXT "UOM 120; BOX 100, 100;", L;
UNIT D;
UOM 120;
BOX 100, 100;
UNIT C;
MZP 5, 9;
TEXT "UOM 720; BOX 100, 100;", L;
UNIT D;
UOM 720;
BOX 100, 100;
PAGE; EXIT;
UOM
355