Repeating Graphic Simulation; Tool Display - HEIDENHAIN TNC 640 User Manual

19

Repeating graphic simulation

A part program can be graphically simulated as often as desired. To
do so you can reset the graphic to the workpiece blank.
Soft key

Tool display

Regardless of the operating mode, you can also show the tool
during the simulation.
Soft key
The control displays the tool in various colors:
Red: Tool is in effect
Blue: Tool is retracted
762
Function
Display the unmachined blank in the Program
run, single block and Program run, full
sequence operating modes
Display the unmachined blank in the Test Run
operating mode
Function
Program run, full sequence / Program run,
single block
Test Run
Test Run and Program Run | Graphics
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017