Chapter Seven: Advanced System Operation; Stop Communications - Marmitek PROGUARD 800 User Manual

Chapter Seven: Advanced System Operation

Besides the basic functions described in the previous chapters, you can access
additional functions via the menu. This chapter describes these functions and the menu
navigation procedure.
Menu Navigation
Using the LCD keypad on the front panel, you can navigate through the menus using the
menu navigation keys ( / ) and make simple yes/no decisions using the and
The availability of menu items depends on the user code that you used to enter Menu
mode. Some menu items are limited to the Master code only (User 1). Certain menu
items, such as system programming functions, are not intended for the user and can only
be accessed by the installer.
The following example explains the procedure for Event Log viewing (Master code
access only).
1. Press
2. Enter the Master code; the first menu item in the main menu, 1. Stop
Comm. is displayed.
3. Press
4. Press
5. Press
Press if you do not want to choose the displayed item. Pressing
back to the previous menu level.
Menu mode automatically terminates two minutes after the last keystroke.
Throughout this chapter, we have tried to include all of the system functions using a
similar structure and order as they appear in the menu. The above procedure provides a
detailed explanation of menu navigation. However, in order to simplify the procedures
that appear in the rest of this chapter, the following conventions are used:
This...
From the Bypass Zones
menu, select Unbypass All.
Select...
[61]

7.1: Stop Communications

The Stop Communications function enables you to prevent the system from reporting in
the event of a false alarm.
To stop communications:
•
From the main menu, select Stop Com. [1]; all pending messages to
the monitoring service are canceled.
-22-
to enter Menu mode.
until 6. Event Log is displayed.
to enter the Event Log menu; 1. View Log is displayed.
to choose the displayed item.
Means...
Enter the main menu by pressing
Using the arrow keys, navigate until you reach Bypass Zones
and press
Unbypass All and press
Use the arrow keys to scroll through the options and press
The shortcut to a specific menu item from the main menu. In this
case, this is the shortcut for View Log. These appear in the
procedures as an additional aid to menu navigation.
. Using the arrow keys, navigate until you reach
.
also takes you
and entering your user code.
© MARMITEK
keys.
.