Disabling And Enabling Web Page Access; Device Information - Cisco 7940 - IP Phone VoIP Administration Manual

Chapter 7 Monitoring the Cisco Unified IP Phone Remotely
•

Disabling and Enabling Web Page Access

For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you
will prevent access to the web pages that are described in this chapter and to the Cisco Unified CM User
Options.
To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications
Manager Administration:
Choose Device > Phone.
Step 1
Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 2
Click the device name to open the Phone Configuration window for the device.
Step 3
From the Web Access drop-down list box, choose Disabled.
Step 4
Click Update.
Step 5
Note
To enable web page access when it is disabled, see the preceding steps about disabling access. Follow
the same steps, but choose Enabled in

Device Information

The Device Information area on a phone's web page displays device settings and related information for
the phone.
To display the Device Information area, access the web page for the phone as described in the
the Web Page for a Phone" section on page
Table 7-1
Item
MAC Address
Host Name
Phone DN
App Load ID
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Status Messages—Displays various system messages. For more information, see the
–
Logs" section on page
Streaming Statistics—Includes the following hyperlink:
Stream 1—Display a variety of streaming statistics. For more information, see the
–
Statistics" section on page
Some features, such as Cisco Quality Report Tool, do not function properly without access to
the phone web pages. Disabling web access also affects any serviceability application that relies
on web access, such as CiscoWorks.
Table 7-1 describes these items.
Device Information Area Items
Description
Media Access Control (MAC) address of the phone
Host name that the DHCP server assigned to the phone
Directory number assigned to the phone
Identifier of the firmware running on the phone
7-10.
7-11.
Step 4 to enable the web page.
7-2, and then click the Device Information hyperlink.
Disabling and Enabling Web Page Access
"Streaming
"Accessing
"Device
7-3