Cisco 7940 - IP Phone VoIP Administration Manual page 60

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
Default Router 1 Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5.)
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1 Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–5) used
DNS Server 2
by the phone.
DNS Server 3
DNS Server 4
DNS Server 5
Operational Auxiliary Virtual Local Area Network (VLAN) configured
VLAN Id on a Cisco Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this
option indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative
VLAN are configured, this option is blank.
Admin. VLAN Id Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary VLAN
from the switch, ignored otherwise.
Call Manager 1 Cisco Unified Communications Manager servers that are
available for processing calls from this phone, in prioritized
Call Manager 2
order.
Call Manager 3
For more information, see the
Call Manager 4
Communications Manager Options" section on page
Call Manager 5
URL Information URL of the help text that displays on the phone.
URL Directories URL of the server from which the phone obtains directory
information.
URL Messages URL of the server from which the phone obtains message
services.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
4-6
Chapter 4
"Cisco Unified
4-10.
Configuring Network Settings on the Cisco Unified IP Phone
To Change
Set the DHCP Enabled option to No.
1.
Scroll to the appropriate Default Router
2.
option, press the Edit softkey, and then
enter a new router IP address.
Press the Validate softkey.
3.
Repeat Steps 3 and 4 as needed to assign
4.
backup routers.
Press the Save softkey.
5.
Scroll to the appropriate DNS Server
1.
option, press the Edit softkey, and then
enter a new DNS server IP address.
2. Press the Validate softkey.
3. Repeat Steps 3 and 4 as needed to assign
backup DNS servers.
4. Press the Save softkey.
The phone obtains its Operational VLAN Id
via Cisco Discovery Protocol (CDP) from
the switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin
VLAN Id option.
1. Scroll to the Admin. VLAN Id option,
press the Edit softkey, and then enter a
new Admin VLAN setting.
Press the Validate softkey and then
2.
press the Save softkey.
You configure an SRST router address in the
Cisco Unified Communications Manager
Administration SRST Reference
Configuration page (choose System >
SRST). You configure an SRST reference in
the Device Pool Configuration page (choose
System > Device Pool).
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
OL-15498-01