Configuring Cisco Unified Ip Phones In Cisco Unified Communications Manager; Communications Manager; Checklist For Configuring The Cisco Unified Ip Phone 7960G And 7940G In Cisco Unified Communications Manager - Cisco 7940 - IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager
To add phones to the Cisco Unified Communications Manager database, you can use:
•
•
•
•
For more information about these choices, see the
Manager Database" section on page
For general information about configuring phones in Cisco Unified Communications Manager, refer to
the "Cisco Unified IP Phone" chapter in Cisco Unified Communications Manager System Guide.
Checklist for Configuring the Cisco Unified IP Phone 7960G and 7940G in Cisco Unified

Communications Manager

Table 1-4
Cisco Unified Communications Manager Administration. The list presents a suggested order to guide
you through the phone configuration process. Some tasks are optional, depending on your system and
user needs. For detailed procedures and information, refer to the sources in the list.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Auto-registration
Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
provides an overview and checklist of configuration tasks for the Cisco Unified IP Phone in
Overview of Configuring and Installing Cisco Unified IP Phones
"Adding Phones to the Cisco Unified Communications
2-7.
1-13