Stack Statistics; Status Messages; Streaming Statistics - Cisco 7940 - IP Phone VoIP Administration Manual

Chapter 7 Monitoring the Cisco Unified IP Phone Remotely

Stack Statistics

The Debug Display area on a phone's web page displays information about the phone's stack tasks. This
information may be useful to Cisco Technical Assistance Center personnel if you require assistance with
troubleshooting.
To display the Stack Statistics area, access the web page for the phone as described in the
the Web Page for a Phone" section on page
Table 7-5
Table 7-5
Item
Socket Task
Phone Task
DSPPoll Task
RTP Task
TLS Task
Config Task
Display Task
CAST Task
Sidecar Task
Audit Task
Undefined Mode
SVC Mode
IRQ Mode
FIQ Mode
SYS Mode

Status Messages

The Status Messages area on a phone's web page displays up to the 10 most recent status messages that
the phone has generated since it was last powered up. You can also see this information from the Status
Messages screen on the phone.

Streaming Statistics

A phone streams information when it is on a a call or running a service that sends or receives audio or
data. The Stream 1 area on a phone's web page provides information about this stream.
describes the items in this area.
To display a network statistics area, access the web page for the phone as described in the
the Web Page for a Phone" section on page
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
describes the items in the Stack Statistics area.
Stack Statistics Area Items
Description
Peak stack consumption for the Socket task
Peak stack consumption for the Phone task
Peak stack consumption for the DPPoll task
Peak stack consumption for the RTP task
Peak stack consumption for the TLS task
Peak stack consumption for the Config task
Peak stack consumption for the Display task
Peak stack consumption for the CAST task
Peak stack consumption for the Sidecar task
Peak stack consumption for the Socket task
Peak stack consumption for the undefined mode
Peak stack consumption for the SVC mode
Peak stack consumption for the IRQ mode
Peak stack consumption for the FIQ mode
Peak stack consumption for the SYS mode
Table 6-1
7-2, and then click the Stack Statistics hyperlink.
describes the status messages that can appear.
7-2, and then click the Stream 1 hyperlink.
Streaming Statistics
"Accessing
Table 7-6
"Accessing
7-11