Configuring Startup Network Settings; Configuring Security On The Cisco Unified Ip Phone - Cisco 7940 - IP Phone VoIP Administration Manual

Configuring Startup Network Settings

4.
If the phone successfully passes through these stages, it has started up properly. If the phone does not
start up properly, see the
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
•
•
•
•
•
•
Collect this information and see
Unified IP Phone."

Configuring Security on the Cisco Unified IP Phone

The security features protects against several threats, including threats to the identity of the phone and
to data. These features establish and maintain authenticated communication streams between the phone
and the Cisco Unified Communications Manager server, and digitally sign files before they are
delivered.
For more information about the security features, see the
Unified IP Phones" section on page
Guide.
A Locally Significant Certificate (LSC) installs on phones after you perform the necessary tasks that are
associated with the CAPF. You can use Cisco Communications Manager Administration to configure an
LSC, as described in Cisco Unified Communications Manager Security Guide.
Alternatively, you can initiate the installation of an LSC from the Security Configuration menu on the
phone. This menu also lets you update or remove an LSC.
Before you do so, make sure that the appropriate Cisco Unified Communications Manager and the
Certificate Authority Proxy Function (CAPF) security configurations are complete:
•
•
•
•
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
3-10
The main LCD screen displays this information:
Current date and time
–
Primary directory number
–
Softkeys
–
"Resolving Startup Problems" section on page
IP address
IP subnet mask
Default gateway IP address
Domain name
DNS server IP address
TFTP server IP address
The CTL file should have a CAPF certificate.
The CAPF certificate must exist in the /usr/local/cm/.security/certs folder in every server in the
cluster.
The CAPF is running and configured.
The phone should have the correct load file. To verify the image, choose
Settings > Status > Firmware Versions. The application load file should begin with P00308.
Chapter 4, "Configuring Network Settings on the Cisco
"Understanding Security Features for Cisco
1-7. Also, refer to Cisco Unified Communications Manager Security
Chapter 3 Setting Up the Cisco Unified IP Phone
8-1.
OL-15498-01