Cisco 7940 - IP Phone VoIP Administration Manual page 63

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
GARP Enabled Indicates whether the phone learns MAC addresses from
Gratuitous Address Resolution Protocol (ARP) responses.
Disabling the phone's ability to accept Gratuitous ARP will
prevent applications that use this mechanism to monitor and
record voice streams from working. If voice monitoring is
not desired, set this option to No (disabled).
Voice VLAN Indicates whether the phone allows a device attached to the
Enabled PC port to access the Voice VLAN. Setting this option to No
(disabled) prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting also
prevents the PC from receiving data sent and received by the
phone. Set this setting to Yes (enabled) if an application that
requires monitoring of the phone's traffic is running on the
PC. These applications include monitoring and recording
applications and network monitoring software.
Auto Line Select Indicates whether the phone shifts the call focus to
Enabled incoming calls on all lines. When this option is set to No
(disabled), the phone will only shift the call focus to
incoming calls on the line that is in use. When this option is
set to Yes, the phone will shift the call focus to the line with
the most recent incoming call.
Video Capacity Indicates whether the phone can participate in video calls
Enabled when connected to an appropriately equipped PC.
DSCP for Cisco Differentiated Services Code Point (DSCP) IP classification
CallManager to for call control signalling.
Device Interface
DSCP For Phone DSCP IP classification for any phone configuration transfer. From Cisco Unified Communications
Configuration
DSCP For DSCP IP classification for phone-based services.
Phone-Based
Services
Security Mode Displays the security mode that is set for the phone.
Web Access Indicates whether the phone's internal web server is enabled
Enabled (Yes) or disabled (No). When disabled, you cannot access a
phone's web pages.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Network Configuration Menu
To Change
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
Manager, choose System > Enterprise
Parameters.
From Cisco Unified Communications
Manager, choose System > Enterprise
Parameters.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
4-9