Provision ISR IP Series User Manual page 50

Page 45
In order to reboot the IPC click on the reboot "Reboot" button and confirm the pop up prompt
message, then wait for the reboot process to finish.
You can also set a scheduled reboot. Tick the "Time
Settings" and set the time period and time for the
reboot. You can choose a day of the week when the
reboot will automatically take place or you can set it
to happen on a daily basis. The reboot will occur on
the specified day and time.
4.2.3 Upgrade
Go to "Maintenance"→"Update" to open the interface as shown below.
1. Click "Browse" button to select the upgrade file.
2. Click "Upgrade" button to start the upgrading process of the IPC.
3. The device will restart automatically once completed.
4. Depending on the update release note, the IPC configuration might reset.
Notice:
1) You must not disconnect to PC or close the IPC during the upgrade process to
prevent permanent damage to the camera.
The camera update file is ***.TAR. the "TAR" file should not be extracted.
2)
4.3 Playback
Playing back videos taken by the camera have 2 options:
A. Video files/Images saved locally on the PC (If any were taken)
B. Video files/Images saved on the Camera SD card (If available)
To access the playback interface, click on the "Search" Main tab. The interface below will
appear.
IP CAMERA USER MANUAL