Provision ISR IP Series User Manual page 48

Page 43
2) Input the IP/MAC address you wish to add to the list
3) Set whether the input is IPv4/IPv6/MAC address
4) Click on add.
5) If you wish to add more than one address, repeat stages 1-4
Once finished, click "Save" to confirm, save the settings and enable the lists.
6)
4.1.4 Security Management
"Security Management" Allows the user to enhance the device security by adding protections
layers and rules.
"Security Service" enables a mechanism that locks the IPC to incoming connection after 3
wring attempts. Releasing the camera from a locked state is by waiting the lock duration or
hard rebooting the camera. This mechanism protects against "Brute Force" attack.
"Password security" allows the user to set the password required strength and password
change policy.
Password level divides to 3 levels:
1) Low: No Requirements.
2) Mid: Minimum of 8 characters. Contains at least one number and one character.
3) High: Minimum of 8 characters. Contains at least one number, one character and
one special character.
Expiration time: After the set duration (30 Days, 60 Days, Half a Year, Year), the camera will
demand for a password change. The current password cannot be reused. Older passwords are
not kept and can be used again.
4.2 Maintenance
Maintenance includes 4 submenus: Backup & Restore, Reboot, Upgrade and Operation log.
4.2.1 Configure Backup & Restore
Backup and restore are used to save the camera's configuration on a PC and use it in case the
camera's configuration was changed or when you wish to change the configuration of several
cameras to be uniformed. This section also allows you to restore the camera's setting to
factory default with some exceptions.
IP CAMERA USER MANUAL