Page 10
4.1.3 Local Config
Got to "System Configuration" →"Local config" as shown below:
1.
From here you can set the path on your computer where local snapshots and videos will
be saved.
You can also choose if the camera will show the current bit-rate on the live-view image
(Local interface only).
4.1.4 Storage
The SD card feature allows you to insert an SD card into the camera and enable the camera to
operate with a local storage. The SD card will be used for both snapshot and video files. You
can allocate a certain percentage for each from the settings menu.
1. Go to "System Configuration" →"Storage" as shown below:
IP CAMERA USER MANUAL
Need help?
Do you have a question about the IP Series and is the answer not in the manual?