Provision ISR IP Series User Manual page 49

Page 44
Go to "Maintenance"→" Backup and Restore".
•
Importing Settings: If you have a configuration file and you wish to import it to the
camera, click on "browse" and choose the relevant config file.
After choosing the file click on "Import settings" and wait for the process to finish.
•
Exporting settings: If you wish to export the configuration settings of the camera click on
"Export". Choose the location on your PC and set the file name. Click on "OK" to save
the file on the desired location.
•
Loading factory default: If for any reason you wish to restore your camera settings to
factory default, you can use the "Load Default" button. Notice that you can mark some
configuration that will be saved:
o Network Config: Will save all the network section configuration
o Security Configuration: Will save all the security section configuration.
o Image configuration: Will save the image section configuration.
4.2.2 Reboot Device
Go to "Maintenance"→"Reboot" to see the interface as shown below.
IP CAMERA USER MANUAL