Provision ISR IP Series User Manual page 47

Page 42
IP CAMERA USER MANUAL
Important Note: once the user is kicked out, the IP address used for connection will be
blacklisted. Therefore, the device used for connection will not be able to connect to the
camera until the IP address will be manually removed from the blacklist.
4.1.3 Block and Allow Lists
"Block and Allow" lists allow the user to create lists of IP/MAC addresses that will be
allowed or denied for connection.
Once a "Block" list is created, all devices except the blocked devices will be allowed to
connect to the camera.
Once an "Allow" list is created, all devices except the allowed devices will be blocked from
connecting to the camera.
Go to "Network" →"Block and Allow Lists" to access the following interface.
The lists can be based on IP Only / MAC only / Both IP and MAC together.
Enable the filtering you wish to activate. For the demonstration, we will enable both IP and
MAC filtering, so the instructions below are true for both.
1) Choose the type of list you wish to create (block or allow)